|
VIA® C3 800MHz or later processors (G3C400-N8)
VIA® Eden 600MHz low power processor (G3C400-N6) |
|
VIA® CLE266 and VT8235
- VIA® CLE266 (VT8623) north bridge with integrated AGP graphic core
- VIA® VT8235 south bridge |
|
One 184-pin DDR SDRAM DIMM socket
2.5V unbuffered PC1600 (DDR200) or PC2100 (DDR266) DDR SDRAM DIMM
Supports up to 1GB system memory using 64Mbit, 128Mbit, 256Mbit or
512Mbit technology |
|
Award BIOS, Windows® 98SE/2000/ME/XP Plug and Play compatible
Supports SCSI sequential boot-up
Flash EPROM for easy BIOS upgrades
Supports DMI 2.0 function
2Mbit flash memory
Supports TFT panel and Digital TV output BIOS core |
|
Supports ACPI specification and OS Directed Power Management for
ATX power supply
Supports ACPI STR (Suspend to RAM) function
Wake-On-Events include:
- Wake-On-Keyboard
- Wake-On-USB Keyboard
- Wake-On-Ring
- RTC timer to power-on the system
System power management supported
CPU stopped clock control
Microsoft®/Intel® APM 1.2 compliant
Soft Power supported - ACPI v1.0a specification |
|
AC'97 supported with full duplex, independent sample rate converter for
audio recording and playback
Standard AC'97 version 2.1
Supports Microsoft® DirectSound
2-channel audio output |
|
Uses VIA VT6103 ethernet Phy controller
Single chip 100Base-TX/10Base-T Physical Layer Solution
MII interface to ethernet controller
10/100 auto sensing
IEEE 802.3 and 10BASE-T/100BASE-TX compliant physical layer interface
IEEE 802.3u auto-negotiation
48-pin SSOP, 3.3V device |
|
Graphics memory
- Shares 8M/16M/32M/64M frame buffer of the system memory
- Optimized Share Memory Architecture (SMA)
Graphics controller
- 133MHz for internal graphic engine clock
- Integrated 250MHz DAC
- Microsoft® DriectX 7.0 and 8.0 compensation
- High quality texture filter modes: nearest, linear, bi-linear and anisotropic
- Internal AGP 8x performance
- Hardware MPEG2 decode engine
- 2D display up to 1920x1440 @ 60Hz refresh
- 3M triangles/sec setup engine
Software drivers
- Windows® 98SE/2000/ME/XP
- Windows NT® 4.0 |
|
Direct TFT flat panel interface up to 24-bit data width; supports
18, 24 or 18+18 TFT panel with LVDS encoders
Interface for external TV encoder
Supports TFT panel up to 1600x1200 resolution |
|
Supports ATA/33, ATA/66, ATA/100 and ATA/133 hard drives
PIO Mode 4 Enhanced IDE (data transfer rate up to 16.6MB/sec.)
ATAPI CD-ROM, LS-120 and ZIP supported |
|
3 USB 2.0/1.1 pin headers (yellow)
1 RJ45 LAN pin header
4 serial pin headers (COM 4 can be switched between RS232, RS422
and RS485 protocols)
1 VGA pin header
1 parallel pin header
1 keyboard and mouse pin header
1 LVDS box header (COM 3 can be used as touch screen interface)
1 TV-out pin header
1 audio output pin header for line-in, line-out and mic-in
1 IDE box header
1 IDE CompactFlashTM socket
1 connector for panel power supply
1 connector for IrDA interface
1 floppy pin header
1 ATX power supply connector
1 chassis fan connector
1 LAN access LED pin header
1 LAN speed LED pin header
1 front panel pin header for PS-ON, HDD LED, PWR LED and reset switch |
|
PCI 2.2 and AC'97 2.1 compliant |
|
6 layers, EBX form factor
20.4cm (8.03") x 14.5cm (5.70")
All specifications above are subject to change without prior notice. |